The hydraulic systems on the D-Series machines are variable flow, load- sensing, closed center systems that provide flow for all cutting edges at all engine speeds. The pump on the 416D is an axial piston unit that provides a flow of 37 gpm at 2200 rpm. System pressure is set at 3000 psi. The pump used on the 420D and 430D is also a variable flow, axial piston unit with a flow of 43 gpm at 2200 rpm. The system pressure is set at 3300 psi. The hydraulic pumps for the D-Series machines are driven off a transmission-mounted PTO.

The course runs 6,800 yards along the creek. Par is 72. Greens fees are $100 to $120. There''s also a nine-hole, par-three course that can be played at night, under floodlights.The city''s premier night golf experience, however, is at the Nad Al Sheba Club (formerly the Dubai Golf and Racing Club). A full-length course (18 holes, 6,428 yards, par 71), Nad Al Sheba has taken pains to make sure every hole is illuminated.There''s no problem with shadows because there are no trees on the course. However, the lack of trees means players must contend with the wind, so those experienced with links-style courses will particularly enjoy Nad Al Sheba.

When I suggested this to Linda (while standing out of frying pan range, I should note), she suggested that it would make more sense to dab the cleaning paste onto those spots while I was still wearing the overalls. Using a baseball bat, maybe.When I come out of my shop--even if I''m only walking through on my way to drop off cleaning rags--I wind up with more spot than overall. I''m a stain magnet, plain and simple.Rather than dabbing cleanser on the spots, it would be easier to have one of those sheep-dipping trenches full of cleansing liquid between my shop and the house so I could just wallow and wade through it as a matter of course. Back Saver Forklift Cylinder Handler allows cylinders to be safely removed from a cabinet and placed directly on the back of a forklift truck without manual lifting. Back Saver users simply align the tank with the forklift and use a hand winch to load the cylinder into place; no stressful lifting or positioning is required. The all-welded steel construction of the unit allows it to safely carry three cylinders and and provides a 100-pound lift capacity. Unit rolls on 5-inch casters. H&H Sales, Huntertown, Ind. It used to take four people to put a pickup topper in place or take it off. That many people were not always available. We took a 3/8-inch I-bolt and placed it perfectly in the center in the top of the topper. Then we placed a hand winch on the wall and connected the cable through two pulleys, one directly over the topper.

©2003 www.autoheaters.net All rights reserved.