177ONT planterAnd adding to the already extensive line-up of seeding equipment, John Deere introduces the most productive 24 row 30-inch-spaced planter in it''s history, the new 177ONT CCS front-fold planter.Designed with a new frame, new hydraulics, new drive system, and new markers, this planter offers more value and covers more acres in less time than any other 24-row planter on the market.The planter has been re-designed with a new, stronger frame to handle the toughest conditions. It is a 3-section flexible frame with a new vertical truss design. A massive 16- x 8-inch telescoping hitch improves maneuverability and adds strength to the planter.

Test results on one inspection of 1,520 tractor and trailer combinations revealed that 46% of these vehicles had brakes that were out of adjustment. The remaining OOS vehicles were cited for such defects as audible air leaks, cracked brake drums, loose brake components, brake linings not firmly attached to the shoe, brake lining less than one-quarter-inch thick, brake car lining saturated with oil or grease, and damaged or frayed air line hoses or tubing.Interpreting brake termsBefore attempting to specify an air brake system for articulated vehicles, let''s define certain brake terminology so that the vehicle manufacturer, equipment dealer and truck fleet manager are all on the same frequency of communication:Balanced Braking. This would occur on a tractor trailer combination when the brakes'' forces are divided evenly between the tractor and the trailer, or trailers. The trailer brakes would apply just before the tractor brakes and the tractor brakes would release just before the trailer brakes. In other words, every brake in the vehicle combination would be contributing to its designed share of the total braking effort. Also, balanced braking prevents trailer sluing (when the trailer wheels lock and go into an uncontrollable skid), heater as well as tractor jackknifing.

Shielded-Metal-Arc Welding (SMAW, STICK)AWS (American Welding Society) A5 specifications Set standards for electronics for SMAW of carbon, stainless, and low alloy steels; aluminum copper, and nickel and their alloys and weld-surfacing. Designations for covered electrodes carry the prefix ''E''. Packaged to AWS specifications, electrodes come in boxes, cans, or other containers, labeled with their AWS specification and trade name, quality control (heat or lot) number, supplier name, diameter and length, and weight of contents. Specifications require that every electrode bc marked for identification near with its numeric designation the grip end.To select a covered SMAW electrode, consider these factors, in approximate order of importance.

©2003 www.autoheaters.net All rights reserved.